comparison between low medium and high preussre boilers

Details


  • Production capacity: 35-75 t/h
  • Work pressure: 1.25-5.3 MPA
  • Applicable fuel: Bituminous coal, anthracite, meagre coal, lignite, gangue, waste, sludge
  • Applicable industry: Chemical, food, tobacco, textile, printing and dyeing, feed, medicine, building material, wine, rubber, hospital


Product introduction

  As a new mature high-efficiency and low-pollution clean coal technology, circulating fluidized bed combustion (CFBC) technology has many advantages that other combustion methods do not have. Circulating fluidized bed combustion is low-temperature combustion, so the NOx emission is much lower than that of pulverized coal furnace, only 200ppm. CFBC can desulfurize directly during the combustion process, and the desulfurization efficiency is high. The technology and equipment are simple and economic, and the costs of its initial investment and operation are much lower than those of dry pulverized coal furnace and flue gas desulfurization (PC+FCD). The discharged ash residue has good activity and is easy to be comprehensive utilized without secondary ash residue pollution. The load adjustment range is large, and the low load can be reduced to about 30% of the full load.


Quick inquiry:
I need the quotation of , the fuel is , this capacity is , the pressure is , use for . My Name is , my Email is , my phone number is , Please Send the detail information for me!






High temperature cyclone separator
  • High efficiency, wear resistance, separation efficiency ≥ 98%, effectively improve the combustion efficiency of the boiler thermal efficiency.

Large furnace design
  • Large furnace, low velocity design; the application of wearproof tube technology, reducing erosive abrasion.

  • Extend the residence time of coal particles in the furnace so that the coal can be fully burned.

Bell jar type hood
  • Adopt bell type hood to distribute air averagely and avoid fuel reverse to wind chamber.

Low bed pressure operation
  • By particle optimization, the operating bed pressure can be decreased to 3500Pa, which effectively saves operating costs and greatly reduces the oxynitride generated.

Model Rated Thermal Power t/h Working Pressure MPA Rated Output Water Temperature ℃ Thermal Efficiency %
DHX35-1.25-AⅠ 35 1.25 194 89
DHX50-1.25-AⅠ 50 1.25 194 89
DHX75-1.25-AⅠ 75 1.25 194 89
ZZ-35/3.82-AⅠ 35 3.82 450 89
ZZ-50/3.82-AⅠ 50 3.82 450 89
ZZ-65/3.82-AⅠ 65 3.82 450 91
ZZ-75/3.82-AⅠ 75 3.82 450 91
ZZ-75/5.3-AⅠ 75 5.3 485 91

CONTACT FORM



  • A boiler is an appliance designed to heat water and produce energy. The heat is applied to water in an enclosed container before being distributed throughout the system. The major difference between a low-pressure and a high-pressure boiler is the amount of pressure per square inch and pounds per square inch gauge that the boiler produces.

    View More
  • Water pressure never exceeds 260 psi: 3. Temperature will always be greater than $250^oC$ Temperature will never be greater than $250^oC$. 4: For the safety due to high working pressures, these boilers are required to be monitored all the time. Since these boilers work on low working pressure, they don’t need continuous monitoring. 5

    View More
  • Boilers are one of the most commonly misunderstood pieces of home heating equipment. As a leading provider of boiler repair in Park City, we often get questions and concerns related to the safety of the machinery, especially in relation to high or low pressure issues.. The truth is that any residential boiler equipment is designed with family usage in mind.

    View More
  • If system requirements are for hot water of more than 250°F, a high-temperature water boiler should be considered. Steam boilers are designed for low-pressure or high-pressure applications. Low-pressure boilers are limited to 15 psig design, and are typically used for heating applications.

    View More
  • Find out today the differences between high pressure condensate and low pressure condensate. Today on Boiler University's Weekly Boiler Tips, Jude goes through why a steam system needs to separate

    View More
  • The key difference between low and high pressure systems is that low pressure systems are regions in the atmosphere where the air is rising, while high pressure systems are regions in the atmosphere where the air is descending.. The word pressure system is a common term in meteorological reports, and in the news and often indicates that something is out of place.

    View More
  • Low and medium pressure boilers must be protected from scale deposition and corrosion to promote optimum energy efficiency and prolong the useful life of the plant equipment. The definition of low and medium pressure is somewhat discretionary. For the purposes of this discussion, low pressure shall apply to boilers up to 150 psig. These boilers…

    View More
  • Let’s start with a simple fact: low-pressure steam travels faster than high-pressure steam. Surprised? It’s true. If the load is the same in both cases, the low-pressure steam will move through the pipes much more quickly than the high-pressure steam. The reason is simple: High-pressure steam fits into a smaller space than low-pressure steam.

    View More
  • As the water supply comes from the mains, at mains pressure, your water will be of a high pressure and suitable for a large majority of high pressure taps provided you have a fairly good combi boiler. Pressures can vary from boiler to boiler, but the typical pressure expectation from a combi-boiler is somewhere between 1 and 2 Bar.

    View More
  • I suspect that every industry has its own criteria for steam systems, and I am only familiar with systems in an oil refinery. At the plant where I spent the first fifteen years of my career, we had the following steam systems (all expressed in PSI

    View More